CCS LED光源 PSB3-30024 Series 控制器 (定電壓)

Light controller

CCS high-capacity Analog Control Unit is provided with three external control methods: analog, serial, and parallel control.
It operates on a 100 to 240 VAC input and measures 97 x 245 x 110 mm (width x depth x height).

加入追蹤

產品內容

Model	PSB3-30024
Lighting Method	Continuous lighting
Drive Method	Constant-voltage system
Intensity control method	Variable voltage control
No. of channels	1 channel
Applicable Light Unit (rated)	24 V 300 W
	Intensity
control	Manual and external intensity	Manual/External switch (MODE)
control	Variable output voltage range	Select between 3 steps by using the intensity range selector (RANGE).
Manual	Set any of 256 steps via the setting switch. Press and hold the switch for 2 seconds to lock the intensity value.
External	Parallel communication	8-bit intensity value setting (B0 to B7) and write signal (WR)
	Serial communication	Command input via EIA-485 communication
	Analog input	Analog voltage (0 V to +5 V)
	External control mode can be selected by pushing the setting switch while turning ON the power.
ON/OFF control	Parallel bit input	Lighting signal (OFF)
ON/OFF control	Serial communication	Command input via EIA-485 communication
EIA-485 communication settings	ID	Set by using the ID switch (00 to 03) Connect up to four units
EIA-485 communication settings	Terminating resistance	Set by using the ID switch (Terminating resistance is ON only when ID = 00)
Lighting delay (typ.)	0.1 s
Error detection display	"Err" is displayed on the digital display.
Error detection output	Errors are output and light output is stopped for an internal AC power error.
Error detection output	External control Connector	Error output terminal (OC, OE), photocoupler insulation, open-collector output, alert open (load current of 10 mA or less), and error status (serial communication)
Over current protection	Operates at 105% of the rated current or higher. Resets by cycling the Control Unit.
Overvoltage protection	Operates at 120% to 155% of the rated voltage. Resets by cycling the Control Unit.
Input voltage (rated)	100 to 240 VAC (±10% - 15%), 50/60 Hz
Power consumption (typ.)	410 VA
Frequency	50/60 Hz
Inrush current (typ.)	40 A at cold start
Ground leakage current	3.5 mA max. (264 VAC, 60 Hz, with no load)
Output voltage variation range (typ.)	Select between 3 steps by using the intensity range selector.
	12 V to 24 V *With no load
	15 V to 24 V *With no load
	18 V to 24 V *With no load
Operating temperature and humidity	Temperature: 0 to 40°C, Humidity: 20% to 85%RH (with no condensation)
Storage temperature and humidity	Temperature: -20 to 60°C, Humidity: 20% to 85%RH (with no condensation)
Vibration resistance	Acceleration: 19.6 m/sec2, Frequency: 10 to 55 Hz, Cycle: 3 min., Sweep cycle: each hour in the X, Y, and Z directions
Cooling method	Forced air cooling
CE marking	Safety standard: EN61010-1 compliant, EMC standard: EN61326-1 Class A compliant
Environmental regulations	RoHS compliant
Material, coating, surface processing	Steel plate, Thickness of cover: 1.0, Thickness of chassis: 1.6, N3 leather tone finish
Weight	2,300 g max.
Accessories	3-prong AC cord with ground terminal (2 m) x 1, Instruction Guide x 1